PLEASE CONTACT RSSA FOR AVAILABILITY

ON ALL COMMERCIAL UNITS

714-774-3290

MON-SAT 9am-6pm

APPLICATIONS
MEDIUM TO LARGE RESTAURANTS WITH HEAVY VOLUME BUT ONLY AS
MUCH DIFFICULT FOOD WASTE AS WOULD RESULT FROM THE VARIETY OF AN AVERAGE MENU.

FEATURES
•  2 HP disposer, dual voltage
•  Fan cooled motor with ball bearing construction, and integral overload protection
•  Dynamically balanced for smooth, long wearing operation
•  Hush Cushion® mounting connection for 6" cone or sink opening includes an auxiliary water inlet
•  Cast iron grind chamber with directional feeder ridges
•  Cast iron exit chamber with auxiliary water injection inlet
•  6 1/4" Diameter heavy duty, cast stainless steel turntable
•  2 Jam resistant, hardened stainless steel swivel impellers with tungsten carbide inserts
•  Stainless steel undercutter blade
•  Hard, tough, cast alloy grind ring with dual stage grinding action
•  Lifetime particle size control by non-wearing exit slots
•  Threaded adjustable stainless steel legs

ELECTRICAL INFORMATION
• Commercially Rated heavy-Duty Motor
• Single Phase Unit
• 1725 RPM

Retails $2800.00
Your Price $1960.00

Plumbing
Models 2000-1 and 2000-3 are equipped with a drain outlet for connection to a
conventional 2" trap. The trap may be connected to a 2" branch waste line running
directly into a waste stack. We recommend a slope in the waste line of not less than 1/4"
per foot. Limit the 2" drain line to a turn free run of 15', then connect to a 4" or 6" line or
stack. Connect directly to waste line, not through a grease interceptor.

Motor Data
2000-1 60 cycle 1 Phase 2 HP 1725 RPM 110-120/220-240 volts 17/8.5 amps
Bearing permanently lubricated. Manual reset overload protection in motor.

NOTE: The legs can be cut shorter if the unit must be lower than the minimum shown
for the screw adjustment. 2" clearance must be maintained beneath the motor for
ventilation. For example, on a flat floor the model 2000-1 and the model 2000-3
can be shortened by 1/2". If space between disposer and wall is insufficient to allow for
installation of trap, waste line may have to be at an angle to the wall as shown.
See disposer leg modification instructions.

NOTE: Disposer assembly includes disposer, mountings, and drain outlet.
Other items shown in gray are available in mounting systems or ordered separately.
Installation should be made in accordance with local codes.

Waste King® Exclusives
• Anti-Jam Swivel Impellers rotate out of the way of an impending jam,
then fall back into grinding position, pulverizing waste particles
• Stainless Steel Undercutter Blade located beneath the grind ring snips fibrous and
stringy waste into small particles making them less likely to clog drain lines
• Hush-Cushions® isolate the unit from metal to metal contact, significantly reducing noise level.
Hush-Cushions® are specially compounded and designed to withstand vibration
and tension, and have a built-in safety splash guard

May take up to 1 to 2 weeks to ship