SE-2000

Digital Encoder

Digital encoder ideally suited for

cable, small broadcast and high

quality contribution applications.

The Motorola SE-2000 digital video encoder

provides Motorola's sixth generation video

compression technology in a compact chassis

that is ideally suited for the cable headend,

small broadcast and high bandwidth contribution

applications. The SE-2000 digital encoder

accepts either analog composite or digital CCIR-

601 video and performs MPEG-2 compression

utilizing Motorola's new PurePixel™ processing

algorithms, providing very high video quality at

low bit rates. Video compression uses I-frame

refresh to facilitate seamless MPEG-2 stream

splicing. The video compression data rate is

controlled by a simple front panel interface or

through the Ethernet port via SNMP. Two stereo

audio channels are compressed with either

Dolby® brand AC3 or MPEG layer II encoding.

The Motorola SE-2000 provides three types of

outputs; DVB-ASI, 10/100/1000Base-T Ethernet

and digital headend expansion interface (DHEI)

for easy interoperability with cable headends and

broadcast equipment.

The Motorola SE-2000 is MPEG-2 and DVB

compliant.

For more information regarding

any of these features contact your

Motorola sales representative.

HIGHLIGHTS INCLUDE:

• Compact, 1 RU design

• Analog or digital input

• DHEI, 10/100/1000Base-T

Ethernet or DVB-ASI output

• Simple, front panel or SNMP

Ethernet control and monitoring

• 4:2:0 or 4:2:2 video encoding

modes

• Dolby brand AC3 and MPEG

layer II audio coding support

• Motorola PurePixel™ processing

dual-pass encoding capability

• DVB SI and Teletext compliant

• Statistical multiplexing capability

with the use of external Motorola

TMX-2010 multiplexer

5562-0305-0K

Motorola, Inc.

Broadband Communications Sector

6450 Sequence Drive

San Diego, CA 92121

858.455.1500

www.motorola.com/broadband

INPUTS/OUTPUTS

GENERAL SPECIFICATIONS

1 3 5 6 9 10

Video Processing

Mode: NTSC, analog composite

PAL, analog composite

CCIR601

Resolution: 720 x 480

704 x 480

544 x 480

528 x 480

480 x 480

352 x 480

720 x 576

704 x 576

544 x 576

528 x 576

480 x 576

352 x 576

720 x 512 (4:2:2 only)

720 x 608 (4:2:2 only)

Compression Rate: 0.1, 0.2 (still frame)

1.0 to 15.0 Mbps (4:2:0)

1.0 to 45.0 Mbps (4:2:2)

Audio Processing

Modes: Dolby® brand AC3

Pre-compressed

MPEG layer II

Compression Rates: 96, 112, 128, 160, 192,

224, 256, 320, 384, 448*,

512*, 576*,640* kbps

(*AC3 only)

Sampling Rates: 44.1 or 48 Ksps

Transport Output

DVB-ASI: (3) BNC, female

DHEI (29.26 MHz): HD-15, male

10/100/1000Base-T

Ethernet: (2) RJ-45, female

Digital Video Input

Signal: Serial digital 4:2:2 per

SMPTE-259M/SMPTE-

125M

Connector: BNC, female

Number: 2 (one active loopthrough)

Analog Video Input

Signal: Analog composite per

RS-170A and CCIR624-4,

NTSC-525 and PAL-625

Connector: BNC, female

Number: 2 (one loop-through)

Digital Audio Input

Signal: AES3

Connector: BNC; female

Number: 2

Digital Audio Input (embedded)

Signal: AES/EBU

Connector: Via digital video input

Number: 2

Analog Audio Input

Connector: Terminal block (balanced;

L1 ±, R1 ±, GND1, L2 ±,

R2 ±, GND2)

Impedance: 600 Ω

Number: 2

Control and Status

Type: Front panel, form C and

10/100BaseT Ethernet

(SNMP)

Physical

Width: 18.97” (48cm)

Depth: 19.9” (51cm)

Height: 1.73” (4.4cm)

Weight: 15.5 lb

Power: 115-230VAC @ 1A (max)

Other