Specification

• Mfr Part Number: 9650SE-2LP SGL
• Features:
• 8th-generation StorSwitch non-blocking switched architecture
• On-board I/O RISC processor and RAID offload provides true hardware RAID: SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives
• Bootable array support for greater fault tolerance
• Variable stripe size for performance tuning by application
• 64-bit LBA support
• ATA pass-through mode support
• 128MB DDR2-533 memory with ECC protection
• 32 pooled DMA channels
• Complete configuration management suite:
• 3ware BIOS Manager 2 (3BM2) - easy to use BIOS configuration tool
• 3ware Disk Manager 2 (3DM2) - browser-based management tool
• Command Line Interface (CLI) - scriptable configuration tool
• SNMP support
• SMTP support for email/pager notification
• ATA/6 and Out of band (OOB) staggered drive spin-up support
• Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN
• Multiple logical unit sizes and RAID levels on one card
• Multiple card support within a system for large storage requirements
• Hot-swap and hot-spare support for data availability
• Dynamic sector repair for robust data protection
• S.M.A.R.T. disk drive monitoring for reliability
• Emergency Flash Recovery protects against failed firmware upgrade
• Drive activity LED support
• Online Capacity Expansion and RAID Level Migration
• Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal
• Drive insertion and removal notification
• Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane)
• Chassis Control Unit for enclosure management via I²C
• Port: 2x SATA, Serial ATA 2.6 Specification support
• Host Interface: PCI-Express x1, PCI Express 1.1 compliant
• Raid Levels: 0, 1, Single Disk, JBOD
• Onboard Memory: 128MB DDR2-533
• Connector Type: Discrete
• BBU Support: No
• BIOS PnP (plug and play) and BBS (BIOS boot specification) support
• Power Requirements: 18W maximum
• Form Factor: Low Profile
• Dimensions (LxH): 7.3 x 2.73 inch / 18.54 x 6.93 cm
• Package: OEM