Specifications:

• The Camera Extension Cord for Nikon is perfect for when you need to move your flash away from the camera for special lighting effects
• Connect your Nikon Speedlite on one end of the cord while the end with the hot shoe
• The Camera Flash Accessory Cord is an extremely useful accessory for Nikon
• The Extension Cord allowing an external flash to be used away from the camera
• This Power Extension Cord is a useful tool With perfect design
• This Camera Extension Cord  have high performance
• Compact design can fully maintain all of the flash capabilities
• This Camera Power Extension Cord is the best choice for you

Details:

 

• This Flash Accessory Power Extension Cord is a useful tool

 

 

• This Flash Accessory Power Extension Cord can fully maintain all of the flash capabilities

 

 

 

• The unique design of this Flash Accessory Power Extension Cord is good

 

 

• This Flash Accessory Power Extension Cord made of high quality, it is durable to use

 

 

• Allows an external flash to be used away from the camera, flexibility to direct light from a variety of angles

How to Connect Extension Cords for the Outdoors:



Moisture causes hazards when you are using an extension cord outdoors. When moisture enters an electrical circuit, it can short out the circuit and cause an electrical fire or electrocution. Using the correct extension cord connected to electrical safety devices will ensure you work safely when powering outdoor equipment. Proper extension cords are marked "For Outdoor Use" and have a thick insulation coating to reduce water penetration

• Unravel an outdoor-use extension cord. Run the cord through your hands as you inspect the cord's protective sheathing for nuts, cuts or abrasions. Replace the cord if you find any damage. Inspect each extension cord before use
• Connect the female end of the outdoor extension cord to the power equipment. Stretch the cord toward an outlet. Set the male end of the cord on a surface above ground level. Connect the female end of another extension cord by pushing the two ends firmly together with no space between the extension cord ends, if more than one cord is required
• Plug a ground fault circuit interrupter (GFCI)--a device that can detect an imbalance in the current and disconnect the circuit to prevent shocks--into the wall outlet of your home. Press the red "Reset" button located on the front of the GFCI to activate the GFCI outlet(s)
• Plug the male end of an outdoor use extension cord into the GFCI. Inspect the cord and the electrical equipment if the GFCI trips when you plug in the extension cord before pressing the "Reset" button

Package Included:

• 1 x Extension Cord