Specifications:

• Automatic protection against overload, over temperature and low/high battery conditions
• Two three prong grounded or European AC outlet
• Built in cooling fan
• Power ON/OFF switch
• Input Voltage: DC24V
• Output Voltage: AC 220+/-10
• Peak Power: 500W
• Continuous Power: 350W
• Output Waveform: Modified sine wave
• Frequency: 50Hz
• Efficiency: >90%
• Lower Input Voltage Warning: 10.5VDC+0.5V
• Lower Voltage Protection: 10VDC+0.5V
• Static Current: >300MA
• Over Loading Protection: 350W
• High Temperature Protection: Yes
• Short Circuit Protection: Yes
• Accessories Clamp Cable: Yes
• Size: 120 x 89 x 47mm / 4.8 x 3.5 x 1.9in(L x W x H)

Details:

• The car power inverter is an ultra compact and an highly portable power inverter

• Use along with insert, suitable for all kinds of cars

• Easy control with the switch button

• 350W DC 24V to AC 220V, give you a large power

How to Install a Car Power Inverter:

• Park the vehicle and open the hood. Disconnect the battery by loosening the positive cable with a wrench and pulling it free with your hand
• Mount the power inverter. Pick a location which will allow plenty of air flow around the inverter as they heat up when used. A typical mounting location is on the lower kick panel in the passenger side of the vehicle under the dash
• Wire the inverter. Run a length of wire from the positive side of the inverter to the car's battery by running the wire through a grommet in the firewall
• Connect the wires. Connect the new positive and negative wires to the wires coming from the inverter to the wires you installed into the vehicle by placing terminal ends on the wires and crimping them in place in the same manner as the positive wire at the battery

Package Included:

• 1 x Car Power Inverter
• 1 x Power Cable with Clip