Specifications:

• If you feel your car interior light not really bright then you must try this LED dome light
• Super white bright car LED dome light
• LED dome light is easy to install and long life span of the replacement car light
• Universal design is suitable to many kinds of cars, come with 3 different adapters as the picture shows
• Open lens of the LED car interior lights and remove original bulbs
• Choose included adapter which similar to original bulbs for replacement
• Connect LED PCB and turn on LED car lights, if LED can not light up, please reverse installing direction of adapter and try again
• After function being confirmed, then cut self-adhesive tape to fit and fix the PCB in the housing of dome light bulbs
• Voltage: 12V
• Power Consumption: 1.8W
• Size: 4.6 x 2.59 x 0.50 cm/1.81 x 1.02 x 0.2in (L x W x T)

Details:

• Increase the environment vision and ensure driving safety

• Dedicate design for the long-lasting use

• The back of LED dome light

• LED dome light set

• Bright and soft light

Size in Detail:



Install Interior Car Lights:

• Open up the dome light cover. With older cars just twist the cover until it releases; on newer cars you need to remove several screws
• Pull out the old bulb with your fingers and compare it to the new bulb
• Press the new bulb into the socket. Use a lint-free cloth as the oils in your hands can make the bulb burn out prematurely
• Put the light cover back on
• Turn the light on to make sure it's working

Change a Dome Light Bulb:

• Turn the dome light to the "Off" position. In most vehicles, the "Off" position is the middle of the three options on the switch. Refer to your owner's manual for the exact location
• Remove the bulb lens cover. Depending on the vehicle, you may have to remove two screws holding the lens in place with a screwdriver. If no screws are present, pry the lens off with a flat head screwdriver. Place the screwdriver opposite the light switch and press in. The lens cover should pop off, giving you access to the bulb
• Unscrew the light bulb from the dome socket. Discard the old bulb. Screw a new bulb into the dome socket until the bulb is tight and secured
• Replace the lens cover then push on it to snap it in place or use the screwdriver to secure the screws

Compare Between Before and After Installing the LED Dome Light:

The LED Dome Light:

Package Included:

• 1 x 12 LEDs Car Ceiling Dome Light Bulb
• 3 x Different Adapters