Specifications:

• This is a rational construction of LED Auto Brake Lamp
• Made of super bright LED
• The Car Auto Brake Lamp is slim and dependable performance and can be set easily to fit the place you like without damage 
• You can fix the Car Auto Brake Lamp yellow light on both sides of the car
• The LED auto brake lamp is also perfefct for decorating your car
• Power: 3W
• Voltage: 12V
• LED Color: Yellow

Details:

• The T10 yellow light auto dome LED lamp
• It is flexible and bendable and you can place it onto your car without damage

• This perfect in workmanship design is as thin as a coin
• It's a good select for decorating your car

• Made of super bright LED
• You can fix the Car Auto Brake Lamp yellow light on both sides of the car

• The Car Auto Brake Lamp is slim and dependable performance and can be set easily to fit the place you like without damage 

How to Replace a Tail, Brake or Reverse Light?

Replacing a dead bulb on your car is almost as easy as replacing a light bulb at home. Perform this simple maintenance and avoid the hassle of receiving a citation for a missing brake light.

• Determine how the bulb is accessed: On some models the lens (the red or white plastic part over the light) must be unscrewed from the outside, and on others the bulb is accessible only from inside the trunk. If there are no screws on the lens, you can assume that the bulb must be replaced from inside. Usually there will be a plastic cover that must be removed in order to access the bulb. There may be tabs, screws or small knobs that hold this plastic cover in place.
• Unscrew the lens on the outside, or take off the plastic cover from inside the trunk, to reveal the bulb.
• Unscrew the bulb. You'll have to push in and turn at the same time.
• Take the bulb with you to the auto supply store to help you find an exact duplicate.
• Clean the connection with a wire brush and/or wipe it clean with a rag if there's any corrosion.
• Screw the new bulb into the empty socket. Again, you'll have to push in and turn simultaneously. Line up the tiny raised bumps on the base of the bulb in order to screw it in.
• Replace the lens or the plastic cover.
• Test your work by stepping on the brakes and turning on the headlights while a friend watches the new bulb to make sure it lights up

Package Included:

• 2 x Auto Turn Signal Bulb