Specifications:

• Very noticeable decoration under car
• 8 super bright LED equipped
• Designed for waterproof
• Led Undercar Lights are easy installation with adhesive tape
• For DC 12V car use only
• Light Color: Blue
• Dimension: 33 x 33 x 20mm/1.2 x 1.2 x 0.8in(L x W x H)

Detail:

• Easy installation with adhesive tape.LED Undercar Lamps have a flash and charming effect, you can install the Led Undercar Lights in car bottom or car indoor. When you see gentle light, Under Car LED make you feel comfortable and happy

• Unique and attractive color light .Just take out your original Car Light bulbs and replace with these, can be used with either clear or red lenses, durable and long life

• Colour and luster always unable to fade .LED Car Light Bulbs produce more intense light. LED light travels faster and farther then any ordinary automotive light

• White Light LED Underbody Undercar Auto Decorative Lamp. LED Car Light Bulbs produce a more complete and even lens fill than conventional Led Undercar Lights

Size in Detail:

NOTE: 

• Please fix the electric wire in position properly
• Don't wash the car or make the product contact with water until 24 hours after installation
• Check local laws and regulations before applying this product to vehicle

How to Install Under Car Lights:



Underbody light kits are available in many different styles and colors, and provide a number of possibilities for the car enthusiast to give their ride a clean and modern look. Most kits come in two different styles: neon and LED. LED lights, while not as bright in the daytime as their neon counterparts, are usually the best option as they are more durable, operate better in cold climates and are available in more colors

• Determine the best mounting location. Most kits come with four light-bars. The two short light-bars are designed to be mounted perpendicularly to the car near the front and rear bumpers, and the two longer light-bars should run parallel to the car on either side. Ideally the bars will be mounted such that the bars themselves cannot be seen and only the reflection of the colored lights on the ground are visible
• Mount the light-bars using self-tapping screws and the provided mounting hardware. If additional support is needed, nylon wire ties may be used. Do not mount light-bars near moving parts or sources of excessive heat, such as the radiator or exhaust
• Run the wires from the light-bars to the engine compartment. Cover any exposed wires with automotive wire loom and secure them to the vehicles frame with nylon wire ties
• Ground the lights to the vehicles inner fender by scraping off the paint and attaching the lights ground to the fender with a ring terminal and a self tapping screw
• Determine how you wish to activate the lights. If you want the lights to come on when you are driving, connect the power lead to the parking light circuit. If a switch is to be used, run the wires for the switch from the inside of the car to the engine compartment through the firewall using a factory grommet. Connect one side of the switch to the vehicle's positive battery terminal, and the other to the positive lead from the light-bar wiring harness. Protect the lights and vehicle by placing a 10 amp fuse in-line with the switch and battery. Test for function by turning the switch to the on position and looking for illumination

Warnings:

• Pick a color that compliments the vehicle on which the lights are being installed. Many LED kits are available in multiple color models that allow the user to change the color as they see fit
• Before driving with an underbody light kit, check the laws in your area. Many communities have laws that prohibit certain colors for on-road use

Package Included:

• 8 x LED Undercar Lamps