Specifications:

• Super bright white 9 SMD LED
• Comes with three adapter plugs
• Built-in current limiting resistor and protect the LED from reversed polarity + - installation. (If you insert them into the socket and they don't light, please change the direction and they will light)
• Long life time and low power consumption
• Easy to install
• For DC 12V only
• LED Type: 5050 high power SMD LED
• Size: Approx 26 x 26 x 9 mm / 1.02 x 1.02 x 0.35in (L x W x H)

Details:

• Light up your car and your night with this LED Dome Light.This LED dome light comes with 9 SMD LED

• Easy to install and long life-span car LED dome light.long life-span makes the LED dome light is perfect for long time illumination

• Long life-span LED dome light with 3 different adapters as the picture shows and the Universal designed LED dome light is suitable to many kinds of cars

• Long life time and low power consumption, it's suitable for many kinds of cars and comes with 3 different adapters as the picture show you no need care about Interior Dome Light will not work with your car

Size in Detail:

Compare Between Before and After Installing the LED Dome Light:

The LED Dome Light:

How to Change Dome Lights: 

• Inspect the dome light lens before attempting to remove it. Most covers have four small retaining tabs the hold the lens in place. On older models, there may be retaining screws that need to be removed with a Phillips screwdriver. If screws are present, remove them with the screwdriver
• Place the small slotted screwdriver into the gap between the lens and the dome light housing. Gently pry the lens to one side and look up into the gap to determine if the tabs are present on the side of the lens you chose. If not, reposition the screwdriver on another side until you locate the tabs. The tabs are usually located on two of the four sides of a dome light lens
• Pry one of the tab sides of the lens carefully away from the dome light housing using the screwdriver. The dome light lens usually has some flexibility to it, but you can easily crack or damage the lens or the tabs
• Use the screwdriver as a leverage point and once the tabs on one side of the lens are exposed, pry the lens downward with the screwdriver. This will release the tabs on the side of the screwdriver, the lens will drop down and release the other retaining tabs on the opposite side. Remove the lens
• Remove the bulbs from the sockets. There are a variety of different bulbs used for interior lighting. Some bulbs may require turning to extract them from the socket, while others may simply need to be popped out of the retaining clips
• Insert the replacement bulb(s) and test before replacing the lens
• Replace the lens by inserting the retaining tabs on one side and using the screwdriver to pry it into position carefully

Package Included:

• 1 x 9 LED Lamp
• 1 x T10/194 12V Adaptor
• 1 x Ba9s 12V Adaptor
• 1 x Dome Adaptor