Specifications:

• Image Sensor:  CCD  /CMOS
• TV System: NTSC / PAL
• Horizontal Resolution: 420 TVL
• Effective Pixels: PAL: 512(H) x 582(V); NTSC: 512(H) x 492(V)　
• Min. Illumination: 1.0 lux, F=1.2(with IR on 0 lux)
• Diagonal Viewing Angle: 120°
• Night Vision: 0~10m
• S/N Ratio: >48db
• Current: Max. 300mA with IR on
• Video Output: RCA interface, 1.0Vp-p, 75Ohm　   
• Power Supply: DC 12V
• Operating Temperature: -20â„?~ +60â„?
• Operating Humidity: RH95% max
• Storage Temperature: -40â„?~ +80â„?strong>
• Storage Humidity: RH95% max

Features:  

• Excellent picture quality for both day and night vision even in completely dark area
• Park your car easily, speedily and safely with no doubt
• Night Vision Rear View Car Camera helps you keep distance form other cars by giving you clear rearview
• Seriously, Car Rearview Camera will be a lot safer for beginners or even professional drivers
• This Night Vision Car Rear View Camera is ideal for RV, truck, bus, camper, large boat, or any vehicle that has no rear-view mirror or poor rear vision
• Low power consumption and low maintenance
• Small compact size and high sensitivity
• Water-proof structure provides good performance
• The Night Vision Car Rear View Camera allows you to back up with a little more peace of mind
• This small and durable car rear view camera unit will keep you safe and secure because you'll always know what's going on around you
• See what is behind you with this backup wide angle rear view camera
• The small size of this Night Vision Car Rear View Camera allows easy installation in a variety of positions and places

Details:

• Excellent picture quality for both day and night vision even in completely dark area

• With this Night Vision Car Rear View Camera, park your car easily, speedily and safely with no doubt

• Why not obtain this day & night vision car rear view camera for better safety

• The 420TV Lines Car Rear View Camera features water-proof structure, provides good performance and makes you more satisfied

How Does a Rear-View Camera Work in a Car?

• Rear-View Camera Versus Rear-View Mirror
  Rear-View Camera Display Monitor on sun visorRear-view mirrors allow drivers to view a large portion of the area behind their vehicles. However, trunks and rear decks often limit the view of the road as much as ten to 15 feet behind the vehicle. Rear-view cameras, also known as "reversing cameras" or "backup cameras," resolve this problem. These cameras enable drivers to see objects and people directly behind their vehicles.
• How Does a Rear-View Camera Work?
   Rear-View Camera Display Monitor on dash boardThe structure of a rear-view camera is different from other cameras. The reflection of a rear-view camera is horizontally flipped so that it produces a mirrored image. This is essential because the driver and the rear-view camera are in opposite positions. The mirrored image is also necessary because it causes the direction of the display to be constant with the mirrors mounted on the motor vehicle. The rear-view camera display is usually wired to automatically sense when the transmission is set in reverse, and it shows the rear view while the car is in reverse. The other items in the rear of the vehicle are also shown at all times. The rear-view camera usually consists of a wide-angle or fish-eye lens. Although the lens doesn't allow the camera to view distant objects, it does permit the camera to view a continuous horizontal view from one corner, behind the car, to another. Rear-view cameras are also generally mounted at a downward angle. This allows the camera to show potential barriers on the ground in addition to the location and position of walls and docks that may be looming around the corner.
• How is a Rear-View Camera System Installed in a Car?
  Plate-mounted rear-view cameraRear-view camera systems are generally mounted to the lower outside areas of the vehicle or to the vehicle's bumper. With the camera mounted in these locations, it allows greater visibility. The rear-view camera display is often mounted inside the vehicle on either the sun visor or within the dash board area. Rear-view camera systems can be purchased as either wireless or wired back-up systems. In wired systems, the camera is linked to the display monitor via a long cable wire. In wireless systems, images are transformed to radio signals, transmitted and then converted from a radio signal back to a video image once it reaches the receiver and monitor.
  Wired systems such as portable rear-view camera systems or semi-permanent, all-in-one back up camera systems, for example, are generally sold to consumers who have smaller vehicles. These portable units include small display screens. The screen is easily attached to the sun visor and has a lengthy wire that connects to the camera.
  Because signals have to be converted via the airways with wireless systems, they sometimes receive interference from other wireless components as well as poor signal reception. As a result, many believe that much better quality is received with wired systems.

How to Install a Rear-View Camera in Your Car?

• Disconnect the battery cables from the battery. Check the vehicle's repair manual to find out what size wrench to use. Leave the disconnected cables a safe distance from the battery posts.
• Decide where you want to install the rear-view camera. Most people put them in the plastic bumper so they don't have to drill into the car's sheet metal.
• Drill a hole for the camera. Check the installation instructions to see what size drill bit to use. Don't make the hole too large or the camera will fall out.
• Place the camera in the hole using the rubber grommet supplied with the camera. Make sure the camera and grommet are tight.
• Attach the camera's power wire to the backup-light power wire on your car. You'll have to splice the wires together. Use wire cutters to cut the wires, leaving enough excess wire to reconnect. Strip the ends of the wire to expose the bare wire using wire strippers. Splice the wires together using a two-into-one connector. This will give the rear-view camera power when you put the car in reverse.
• Route the camera's output wire to the rear-view monitor and connect the wire to the monitor's input. For installation of the monitor, see the monitor's installation instructions.
• Reconnect the battery, start the car and put the car in reverse. The rear-view monitor should turn on and give you a view of what's behind you.

Tips & Warnings:

• Don't rely solely on the rear-view camera when backing up. Use it as a supplementary aid
• You must have the rear-view monitor set up and installed correctly to receive the video signal from the rear-view camera
• Don't install the camera (or any electrical device) with the battery connected, or you'll risk a severe electric shock

Package Included:

• 1 x Car Rear View Camera
• 1 x 5m Video Extension Cable
• 1 x Power Cable