Specifications:

• Controller card has easy plug & play installation automatically selects IRQ and I/O address
• This PCI controller card supports PCI IRQ sharing -saves valuable resources for other expansion card
• This PCI controller card supports 32-bit PCI bus. PCI specification 2.1
• Express controller card supports re-mapping to legacy addresses
• This cheap controller card supports more than one card into system
• Support Windows 95/98/ME/2000/NT4.0/XP/Vista/Linux & DOS

Details:

• Many section detail. Controller card has easy plug & play installation automatically selects IRQ and I/O address

• The controller card features a port. This PCI controller card supports 32-bit PCI bus. PCI specification 2.1

• Package includes. Express controller card supports re-mapping to legacy addresses

• This PCI controller card supports PCI IRQ sharing -saves valuable resources for other expansion card

How to Set Up this Controller Card:

• Turn off your computer and all devices connected to it
• Remove the computer's cove. Refer to your computer user manual for more details
• Find an unused PCI slot and remove the metal bracket. Save the bracket screw for later use
• Align the card horizontally with respect to the PCI slot a nd insert it into the sot. Once your have properly positioned the PCI I/O card into the slot. Secure the PCI I/O card with the bracket screw you have saved
• Replace the computer's cover
• Turn your computer on. You are now ready to install the driver

How to Install a SATA Controller Card:

• Turn off the computer and unplug the power cord from the wall outlet or power strip
• Remove the screws used to secure the side panel of your computer case by hand or with a screwdriver and then take the side panel off
• Locate a free PCI slot on the motherboard for the SATA controller card
• Remove the screw securing the face plate to the case with a screwdriver
• Insert the SATA controller card into the PCI slot on the motherboard and push it into place
• Secure the screw for the faceplate with the screwdriver
• Connect one end of an SATA cable to the hard drive or CD/DVD drive and the other end to the SATA connection on the motherboard
• Replace the side panel and tighten the screws to secure the panel
• Plug the power cord back into the wall outlet
• Turn on the computer and press the "F2" key to access the BIOS to verify that the hard drive is being recognized by the computer
• Press the "Esc" key to exit the BIOS and restart the computer

Package Included:

• 1 x Controller Card
• 1 x CD Driver
• 1 x Bracket with COM Ports
• 1 x User Manual