Specifications:

• Extends your limits with greater capacity
• Slim desktop stapler covered with impact, resistant ABS plastic
• Consistent, jam-resistant school stapler
• Reliable stapling performance from a trusted desktop standard
• Smoothly contoured for enhanced handheld comfort, easy to pick up for precision and control
• This Desktop Stapler is lightweight to carry in your pocket, school bag, etc
• Dimension: 9.3 x 4.1 x 2.5cm/3.7 x 1.6 x 1in(L x W x T)

Details:

• The orange and blue color is available for your different taste
• High quality material makes the Portable Stapler durable and reliable for long time use

 

• The fine interior and exterior details of the stapler

• Office Stapler can be used for binding books, pamphlets, brochures or card mounting
• Special design enhances handheld comfort, the desktop stapler is easy to pick up for precision and control

How to Fix a Stapler:

You just don't know how valuable that little stapler is to you...until it breaks and you are left with piles of unfastened pages to sort through. Most stapler problems are caused by rough use, such as slamming the top of the stapler down with your palm instead of gripping both sides of the stapler carefully as you press down gently. If you need to fix a stapler, the process is usually simple, but in some cases it could be damaged beyond a basic repair. In the latter case, unless your stapler is made of solid gold, it's best to save yourself the aggravation of fiddling with it and just purchase a new one.

• Grasp the stainless steel part of the stapler with one hand, and the plastic/acrylic top with the other. Pull them apart until you can see the inside of the stapler.
• Move all of the good staples that you can grab back from the head of the stapler and remove them temporarily.
• Use your tweezers to pull as many of the staples from the front of the stapler out as possible. Your goal is to get to the very first staple at the front, which is probably lodged in. If you can't get that last staple out with your tweezers, try inserting a small flathead screwdriver inside. Work it under the jammed staple until it's free. Use the flathead screwdriver to push the jammed staple up and out from the bottom of the stapler head.
• If you have a heavy-duty stapler (the ones that are used to attach pictures and wires to hard surfaces) the staples are longer and more difficult to remove when lodged into the stapler head. First pull out the spring assembly. Use a pair of needle-nosed pliers to pull the jammed staples out of the head of the stapler. In a worst-case scenario, it could help to drop the stapler on a solid surface a few times to loosen up the staples

Tips & Warnings:

• Don't overload your stapler with staples. This is a common cause of staple jams. Be sure that you are using the right staples to go with your stapler. Some staples are slightly narrower and longer than the common 1/4-inch staples used in offices. You will lessen your chances of a jam when you buy high-quality staples (see link in Resources for a suggestion).
• Trying to use your fingers to remove the jammed staple from underneath the stapler head will probably result in a pricked finger.

Package Included:

• 1 x Stapler