Specifications:

• Wavelength: 635nm
• Output Power: 2mW
• Beam Divergence: 0.1mrad ~ 0.6mrad
• Optical Systems: Optical Coated Glass Lens Group
• Spot Description: The minimum spot diameter Φ0.5mm, spot size can be adjusted according to use distance
• Operating Voltage: DC 3V-6V
• Laser Class: IIIa
• Operating Temperature: -10℃～50â„?
• Storage Temperature: -40-80°C
• Dimensions: 12 x 35mm / 0.47 x 1.38in(Dia. x L)
• Exquisite and durable red laser module
• This laser diode module has high reliability, high stability and long life
• This red laser diode can be applied to Industrial marking devices, laser medical equipment, stage lighting and laser targeting devices and so on

Details:

• Made of high quality material, this red laser module has high reliability, high stability and long life

• This red laser module is suitable for various industrial marking, industrial laser modules and other fields

Size in Detail:



NOTE:

• Red is the positive electrode, the black line is negative

How to Test a Laser Diode:

• Stand the soldering iron on a work surface. Plug the solder iron's power cord into a wall socket for power. Let the soldering iron heat up for 10 minutes.
• Take the exposed end of the black wire and solder it so that is attached to the laser module onto the negative-labeled contact on the battery pack. Let the solder cool for a minute.
• Solder the exposed end of the red wire that is attached to the laser module onto the positive-labeled contact on the battery pack. Let the solder cool for a minute. Unplug the soldering iron.
• Unscrew the front cap from the laser module. Stand the laser module on the work surface with the open end facing up. Rotate the open end so that the hole to the side of the two vertical holes is facing to the right.
• Grip the laser diode by the base with the tweezers. Insert the shorter of the two pins connected to the bottom of the diode into the hole that is to the side of the two vertical holes. Insert the longer of the two pins connected to the bottom of the diode into the hole to the left and above the hole that the shorter pin is inside of.
• Insert one of the two batteries into the battery pack -- lining up the positive and negative contacts on the battery with the text labeled the same on the battery pack.
• Install the other battery into the battery pack -- lining up the positive and negative contacts on the battery with the text labeled the same on the battery pack. Watch the laser diode emit a beam of laser light. Remove one of the two batteries from the battery pack to cause the laser diode to cease functioning.

Package Included:

• 1 x 2mW 635nm Red Laser Module Focusable Dot M635D2-3-1235