The general design of the garage door remote control is in simple pattern and they are in good color matching It is very easy to connect the garage door remote control receiver with the door

Being white, the remote control receiver included in the remote control set is in good workmanship

There is area for the receiver to be ventilated and in model temperature You can get two remote controls once you make the purchase and there is one buckle over each of the RF wireless remote control so that you can keep them safely They are the front side and back side of the garage remote controls

Open your garage door with the garage door remote control easily

The garage door remote control is workable within 660 feet by sending out wireless radio signal

Range: 660 feet (201 meters) Power: 12V DC Channels: 2 Signal Coding: 4 bits Static Current: 6mA Sensitivity: > = -105dB Frequency: 315MHz Working Mode: Momentary Encode/Decode: Auto code learning Chip Size: 6 x 4cm/2.4 x 1.6in(L x W) Remote Control Size: 5 x 2 x 1cm/ 2.0 x 0.8 x 0.4in(L x W x T) Receiver Size: 7 x 5.5 x 2.5cm/2.8 x 2.2x 1.0in(L x W x H) About Wireless Remote Systems: Wireless remote systems allow a user to control various electronic items within a building. With the advent of RF, or radio frequency, users can utilize a remote control without needing a line of sight to the item Securing Your Handset: Unlike the normal television remotes controlled by infrared beams, a wireless remote system can penetrate through walls, doors and even floors with the particular radio frequency attributed to it. This allows users to remotely control items in other rooms, such as a light left on in a bedroom Securing Your Handset: Expansion for multiple items in a building is simple, provided that they are attached to a central wireless base for communication. Aside from an on or off switch, some remote wireless systems offer dimming features for lights on a dimmer switch Securing Your Handset: An outside remote control cannot infiltrate a building's remote system. Each system is based off of a specific code reserved for just that grouping of remotes and base stations How to Change IR to RF: Infrared remotes, or IR, are convenient for controlling electronic devices without having to touch them. The disadvantage is the line of sight requirement for IR hinders its usefulness, since anything blocking the beam renders it useless. You can change an IR into one that uses radio frequency, or RF. This does not require line of sight and works over long distances and through walls. Converting your IR to an RF remote only takes a few minutes and does not require you change the settings on the IR to do so Place the RF transmitter face down on a flat surface and remove the battery compartment lid Insert the batteries from the IR converter kit into the battery compartment of the RF transmitter. Re-place the lid back on the RF transmitter Attach the RF transmitter onto the front side of the IR remote. Use the side clamps of the RF transmitter to hold it in place over the front of the IR. Close the lid on the battery compartment Place the RF receiver next to the device that is going to be controlled, such as a TV. Plug the adaptor for the RF remote receiver power supply in port of the RF remote receiver. Plug the other end of the remote receiver power supply into a wall socket Plug the IR extender cable into the IR port of the RF remote receiver. Place the other end of the IR extender cable across from the IR receiver of the device it is to control Turn the RF remote receiver power on. Press any button on the IR that has now become the RF remote. This now controls the electronic device without the concern of IR's line-of-sight

1 x Remote Control Garage Door Receiver 2 x Remote Controls