Specifications:

Remote Control:

• Voltage: DC 12V
• Current: 12 mA
• Transmission Frequency: 266~433MHz
• Transmission Distance: 200M
• Encoding Type: Fixed code, learning code, rolling code
• Size: 60 x 38 x 14 mm / 2.4 x 1.5 x 0.6 in

Control Switch System:

• Operating Voltage: AC220V  
• Quiescent Current: ≤6mA
• Operating Frequency: 315MHz
• Receiver Sensitivity: -105dBm
• Output Current: ≤10A 
• Size: 31 x 54 x 18mm / 1.22 x 2.12 x 0.70in(L x W x T)

Features:

• This Wireless Remote Control Switch is small enough to fit in a pocket or on a keychain
• Low current draw
• This Garage Door Remote Control is ideal for general purpose in receiving date and controlling signal
• This Garage Door Remote Control can be used in garage door, roller shutter door or windows, remote control door lock, etc.
• Wonderful Wireless Remote Control Switch for home appliance
• Just take a remote controller and you can easily control all electrical appliances at home, moreover, the remote control switch easy installation and use conveniently
• This Wireless Remote Control Switch Board & remote control is with high quality, can last long time
• What's more, this Wireless Remote Control Switch is small enough to fit easily on any key chain

Details:

• Wireless Remote Control Switch Board & Remote Control, your best door keeper

• This Wireless Remote Control can be used in garage door, roller shutter door or windows, remote control door lock, etc.

• This Wireless Remote Control Switch is small enough to fit in a pocket or on a keychain

• Made of high quality material, the Wireless Remote Control Switch is durable and reliable for long time use

Size in Detail:





How to Reset a Remote Control:

If you want to add another remote control for your garage door opener or need to replace a dead battery and reprogram an existing remote, chances are you'll have to reset the opener with the base unit for it to work. The process involves just a few steps and is relatively easy to do

• Replace the battery by opening the remote, taking out the old one(s) and putting in the new one(s). Make sure you buy the right battery for your remote. Match the battery type, size and voltage that came with the remote
• Use a step ladder to access the garage door motorized unit, usually equipped with a safety light. Locate the reset or "learn" button on the unit. Many times, this small button is recessed, so you might need a pen or pencil to reach it
• Push the reset or "learn" button on the opener. While the reset indicator light is blinking for about 30 seconds, point your remote at the opener, then press and hold the remote button that opens the door, and the reset light should stop blinking and glow steady to indicate the controller and opener are now synchronized. If the process doesn't work the first time, try again to make sure you pressed your button during the time when the indicator light is blinking

Package Included:

• 1 x Remote Control Switch
• 1 x Remote Controller