Specifications:

• Wonderful wireless remote control switch for home appliance
• Just take a remote controller and you can easily control all electrical appliances at home, moreover, the remote controlled power switch easy installation and use conveniently

Details:

• Multifunction wireless remote control switch easy your daily life with easy, all you need to do just click the button of the remote control

Remote Control:

• Operating Voltage: 12V (23A battery)
• Operating Current: ≤ 10mA
• Operating Frequency: 310MHz, 315MHz, 418MHz. 433MHz (optional)
• Transmit Power: 10mW
• Frequency Deviation: ≤ ± 75KHz

Details:

• The wireless remote control switch is widely used in industrial control, garage door, window, dumpcart, lift, light control and safe & security industry etc

 

• The remote control switch just receive and save the wireless sign from the remotes, then all can be done

Control Switch System:

• Operating Voltage: DC12V
• Quiescent Current: ≤6mA
• Operating Frequency: 315MHz 433MHz 
• Receiver Sensitivity: -103dBm
• Output Current: ≤10A 
• Size: 68 x 48 x 25mm / 2.7 x 1.88 x 0.98in(L x W x H)

Details:

• You can automate and control a tremendous range of operations and add security, safety, comfort and convenience to your daily life

Size in Detail:

How to Reset a Remote Control:

If you want to add another remote control for your garage door opener or need to replace a dead battery and reprogram an existing remote, chances are you'll have to reset the opener with the base unit for it to work. The process involves just a few steps and is relatively easy to do

• Replace the battery by opening the remote, taking out the old one(s) and putting in the new one(s). Make sure you buy the right battery for your remote. Match the battery type, size and voltage that came with the remote
• Use a step ladder to access the garage door motorized unit, usually equipped with a safety light. Locate the reset or "learn" button on the unit. Many times, this small button is recessed, so you might need a pen or pencil to reach it
• Push the reset or "learn" button on the opener. While the reset indicator light is blinking for about 30 seconds, point your remote at the opener, then press and hold the remote button that opens the door, and the reset light should stop blinking and glow steady to indicate the controller and opener are now synchronized. If the process doesn't work the first time, try again to make sure you pressed your button during the time when the indicator light is blinking

Package Included:

• 1 x Remote Control Switch
• 1 x Remote Controller