Specifications:

• Individually addressable LEDs
• Low thermal resistance: 3â„?W
• Electrically-isolated thermal path
• ROHS and REACH-compliant 
• Output Power: 10W
• Luminous Flux: 780LM
• Emitted Color: Cool White
• Viewing Angle: 110 Degree
• Storage Temperature: -25-65â„?/li>
• DC Forward Voltage: 3.0~3.7V
• DC Forward Current: 350mA ~ 700mA
• Color Temperature: 6000~7000K (ANSI)
• Optimum Working Temperature: -10~45â„?/li>
• Base Size: Approx. 20mm x 1.5mm (Dia. x Thickness)

The more you buy, The cheaper it is.

Welcome to Wholesale! 



Details:








Application: 

• Automotive interior /exterior lighting
• Remote / Solar powered lighting
• Decorative / Pathway lighting
• Automotive forward lighting
• Automotive signal lighting
• Household appliances
• Projector light source
• Household appliances
• Architectural lighting
• General Flashlight
• Traffic signals
• Task lighting

 

LED's Advantages:

• Efficiency: LEDs produce more light per watt than incandescent bulbs
• Color: LEDs can emit light of an intended color without the use of color filters that traditional lighting methods require. This is more efficient and can lower initial costs
• Size: LEDs can be very small and are easily populated onto printed circuit boards
• On/Off Time: LEDs light up very quickly. A typical red indicator LED will achieve full brightness in microseconds. LEDs used in communications devices can have even faster response times
• Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, unlike fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting
• Dimming: LEDs can very easily be dimmed either by Pulse-width modulation or lowering the forward current
• Cool Light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED
• Slow Failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs
• Lifetime: LEDs can have a relatively long useful life. One report estimates 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000-2,000 hours
• Shock Resistance: LEDs, being solid state components, are difficult to damage with external shock, unlike fluorescent and incandescent bulbs which are fragile
• Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner
• Toxicity: LEDs do not contain mercury, unlike fluorescent lamps

NOTE:

• Do not drive LED for more than 5 seconds without proper heat sink

Package Included:

• 1 x CREE MC-E LED Emitter