Specifications:

• Voltage: 3.6V~4.2V
• Output Power: 10W
• Working Temperature: -25~55â„?/li>
• Luminous Flux: 900Lumens(Rated by SSC)
• Dimensions: 9 x 20mm / 0.4 x 0.8in(L x Dia.)
• Color Temperature: Cool White Light 6000-7000K(ANSI)

Features:

• Up to 900 lumens output (rated by SSC)
• Ultra slim size, super high luminous efficacy
• 100% brand new and high quality 10W SSC LED emitter
• Seoul semiconductors P7 C-bin high power 10W LED Emitter
• 21mm high quality head dissipating base connection board
• Low electricity consumption SSC P7 LED emitter is perfect for replace the conventional bulbs

Detailsï¼?br />




Colour Temperature:

• What you see is what you get
• High quality and delicate manufacture LED emitter

Size in Detail:



10W SSC P7 LED Emitter Illumination Effect:

• The photos below were taken in a dark room, without pre-setting the camera or editing the photos afterwards
• Different colour temperatures of the LED bulbs can be seen on the trim of the terracotta pot and on the cactus
• The first photo the object was illuminated with cool light. The cool light is the brightest
• The second photo natural white was used, it is similar to sunlight.
• The third photo the warm white can be seen, which is similar to the color of tungsten lighting and halogen lights

The Kelvin Scale:

Colour temperature has important applications in lighting. The colour temperature of a light source is usually measured in kelvins (K) at which the heated black-body radiator matches the colour of the light source is that source's colour temperature 

• Higher colour temperatures (5000 K or more) are "cool" (green-blue) color, and lower colour temperatures (2700-3000 K) "warm" (yellow-red) color

Application:

• Automotive interior /exterior lighting
• Automotive signal lighting
• Automotive forward lighting
• General Torch
• Architectural lighting
• Projector light source
• Traffic signals
• Task lighting
• Decorative / Pathway lighting
• Remote / Solar powered lighting
• Household appliances 

LED's Advantages: 

• Efficiency: LEDs produce more light per watt than incandescent bulbs
• Color: LEDs can emit light of an intended color without the use of color filters that traditional lighting methods require. This is more efficient and can lower initial costs
• Size: LEDs can be very small and are easily populated onto printed circuit boards
• On/Off Time: LEDs light up very quickly. A typical red indicator LED will achieve full brightness in microseconds. LEDs used in communications devices can have even faster response times
• Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, unlike fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting
• Dimming: LEDs can very easily be dimmed either by Pulse-width modulation or lowering the forward current
• Cool Light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED
• Slow Failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs
• Lifetime: LEDs can have a relatively long useful life. One report estimates 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000-2,000 hours
• Shock Resistance: LEDs, being solid state components, are difficult to damage with external shock, unlike fluorescent and incandescent bulbs which are fragile
• Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner
• Toxicity: LEDs do not contain mercury, unlike fluorescent lamps  

NOTE:

• Do not drive this 10W LED Emitter for more than 5 seconds without proper heat sink

Package Included:  

• 1 x SSC P7 LED Emitter  

Product News:

• LED Emitters provide controlled dimming and strobe functions

  Larson Electronics released a new Magnalight high powered LED emitter that is designed for controlled dimming and strobe functions.

  From http://news.thomasnet.com/fullstory/LED-Emitters-provide-controlled-dimming-and-strobe-functions-581647