Specifications:

• The game card slot is fairly easy to install repair your NDS Lite
• Slot 1 on the NDS Lite is the top slot for DS game cartridges
• The game card slot is a best slot to fix your broken game card slot
• This game card slot  can fix ejecting and read errors
• It is suitable for the original DS Phat or the DS Lite
• With fine workmanship, the game card slot is comfortable to play with

Details:

• With unique design, the game card slot for 3DS adopted advanced techonogy can work well

• This 3DS card slot is made of high quality, which can be used for a long time

• Back of the game card slot for Nintendo 3DS with simple design is perfect for use

• With perfect design, you will find the game card slot is very worthy and practical

• With well designs and exquisite craftsmanship and attention to detail are flawless

How to Replace a Slot in Nintendo DS 1?



When you enter a Nintendo DS game card into the unit it connects to a compartment or slot that reads the information on the card. This slot can become damaged over time. If you are interested in working on electronic devices, you can open up the DS and remove and replace the slot itself

Instructions:

• Things You'll Need
• Turn off your DS and turn the unit over. Remove the screw holding the battery door in place and remove the battery door. Remove the battery and set it aside
• Remove all screws from the rear of the DS. There are rubber pads covering two screws on the bottom of the case, but these can be popped off with the tip of your screwdriver
• Use your fingers to pry off the back case of the DS. The motherboard will be visible in the top housing. On top of the motherboard is the metal game card slot
• Use your soldering iron to heat up and loosen the solder on the metal slot connector panels from their metal pads on the top of the circuit board
• Remove the slot and set it aside
• Fit a new slot in the old one's place and solder the panels to the pads on the top of the circuit board. Wait a few minutes for the solder to dry and reverse the steps for reassembly

How to Insert a Game Card Into a Nintendo DS Lite?



Insert a game card into a Nintendo DS Lite and get your game on. The game cards are small, even smaller than the Game Boy Advance packs, and are inserted into the machine from the back through SLOT-1.Pick up a game card and your Nintendo DS Lite and let the gaming begin

Instructions:

• Turn off the power to the Nintendo DS Lite. The power button is on the right-hand side of the unit
• Pick up the game card that you want to put in the DS Lite. Turn it so that the label side is facing down. Insert the game card into the DS game card slot. This is labeled "SLOT-1" and is found on the back edge of the unit
• Push gently on the DS game card until it clicks
• Open the screen of the Nintendo DS Lite and turn on the power. Wait for the "Touch the Touch Screen to Continue" message, and then tap the touch screen with the stylus. If you don't have a stylus, you can push the "A" button
• Wait for the game to load if you have the Nintendo DS Lite's Automatic Start-Up feature enabled. Otherwise, you will have to manually start the game
• Finished playing? Gently press on the exposed edge of the DS game card to release it from the Nintendo DS Lite

Package Included:

• 1 x Card Slot