Specifications:

• The Housing Case comes complete with screws, shoulder button posts, and even the springs
• This Replacement NDS Lite Housing Case is top and bottom casing, complete with battery compartment
• All buttons and a stylus (both triggers, left control pad, right buttons, start/select and power/volume)
• This NDS Lite Housing Case is used as a replacement to damaged or defective original casing
• This Housing Case is made with high quality material & totally fitted for NDS DS Lite console
• This Replacement NDS Lite Housing Case is waterproofed, satin finish reduces glare from external light
• Size: 13 x 7 x 2.5cm/5.16 x 2.83 x 0.98 in(L x W x H)

Details:

• This Replacement NDS Lite Housing Case is top and bottom casing, complete with battery compartment

• This Housing Case is made with high quality material & totally fitted for NDS DS Lite console

• This Replacement NDS Lite Housing Case is waterproofed, satin finish reduces glare from external light

• The Housing Case comes complete with screws, shoulder button posts, and even the springs

• Perfect design fit for Nintendo DS Lite console. So what are you still waiting for

Size in Detail:

How to Replace a Nintendo DS Lite Case:

Taking apart your DS is a simple exercise. The Nintendo DS Lite is a small handheld video game system that comes equipped with a touchscreen LCD. Because the DS is so small and contains such expensive components, it's only natural that it has a durable plastic case for protection. But even this case can be prone to damage. If the case becomes damaged and needs to be replaced, you don't need to send it to a repair shop; you can replace it on your own.

• Instructions
• Turn off your DS Lite and place it facedown on a sturdy work surface such as a table or desk.
• Use your Phillips screwdriver to remove the screw on the rectangular battery compartment cover. Remove the cover and the battery in the compartment.
• Use the tip of your screwdriver to pop the rubber pads off the two screws on the top corners of the back of the DS. Then remove the screws.
• Remove the three other screws on the sides and bottom of the back of the DS, as well as the single screw located in the battery compartment.
• Pull the back half of the case gently off the front and set it aside. The circuit board will now be exposed in the front half of the case.
• Locate the black wire that connects to the side of the rectangular metal card slot and unplug it.
• Use your Phillips screwdriver to remove the two screws on either side of the circuit board that secure it to the housing.
• Lift the circuit board straight up, but don't remove it as it is still connected via a screen cable.
• Unplug the orange LCD ribbon cable where it connects to the bottom corner of the circuit board. Remove the circuit board and set it aside.
• Remove the screws on the plastic frame covering the LCD screen and then gently remove the frame from the front housing and screen.
• Use the tip of your screwdriver to pop the four rubber screw covers off the screws on each corner of the front housing around the LCD screen.
• Remove the four screws around the LCD screen.
• Separate the two halves of the front housing and set the back half aside to expose the rear of the LCD screen and the speaker assembly.
• Lift the speakers out of the housing and then pop the screen gently out of the housing as well. Replace with a new housing (available from your Nintendo retailer or online) and reassemble in the reverse order you took it apart.

Package Included:

• 1 x Replacement Housing Case for NDS Lite