Specifications:

• Envy of your friends new DS Lite? Now you can have that brand new look at a fraction of the cost!
• The Replacement Housing Shell is made from high quality material for great fitment
• Highly detailed Replacement Housing Shell looks exactly like original DS Lite
• The Replacement Housing Case is made with super high quality material totally fitted for NDS Lite only
• Size: 13.15 x 7.37x 1.1cm/5.26 x 2.95 x 0.87in(L x H x W)

Details:

• Envy of your friends new DS Lite? Now you can have that brand new look at a fraction of the cost!

• The NDS Lite Housing is made from high quality material for great fitment, highly detailed case looks exactly like original DS Lite

• Made with super high quality material totally fitted for NDS Lite only, very well made for long term use

How to Replace a Nintendo DS Lite Case:

• Turn off your DS Lite and place it facedown on a sturdy work surface such as a table or desk
• Use your Phillips screwdriver to remove the screw on the rectangular battery compartment cover. Remove the cover and the battery in the compartment
• Use the tip of your screwdriver to pop the rubber pads off the two screws on the top corners of the back of the DS. Then remove the screws
• Remove the three other screws on the sides and bottom of the back of the DS, as well as the single screw located in the battery compartment
• Pull the back half of the case gently off the front and set it aside. The circuit board will now be exposed in the front half of the case
• Locate the black wire that connects to the side of the rectangular metal card slot and unplug it
• Use your Phillips screwdriver to remove the two screws on either side of the circuit board that secure it to the housing
• Lift the circuit board straight up, but don't remove it as it is still connected via a screen cable
• Unplug the orange LCD ribbon cable where it connects to the bottom corner of the circuit board. Remove the circuit board and set it aside
• Remove the screws on the plastic frame covering the LCD screen and then gently remove the frame from the front housing and screen
• Use the tip of your screwdriver to pop the four rubber screw covers off the screws on each corner of the front housing around the LCD screen
• Remove the four screws around the LCD screen
• Separate the two halves of the front housing and set the back half aside to expose the rear of the LCD screen and the speaker assembly
• Lift the speakers out of the housing and then pop the screen gently out of the housing as well. Replace with a new housing (available from your Nintendo retailer or online) and reassemble in the reverse order you took it apart

Package Included:

• 1 x Replacement Housing Shell / Case for NDS Lite