Specifications:

• This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for Volkswagen, Skoda, Audi and Seat
• This VAG-COM 409.1 Cable can not work if your car uses a protocol/ bus system like VPW,PWM or Can-bus
• Terminal Bus of communication
• Terminal L Ignition for waking up car computing system (ECU: Engine Control Unit)
• Existed 3 different protocols with same OBD2 connector incl. ISO/KWP, VPW, PMW
• This K/L diagnostic interface & cables work on ISO/KWP (Word Protocol) Launched after 1996 only
• Support ISO9141 protocol
• The VAG-COM 409.1 Cable may work with some versions of the car soft, but car soft used a lot of different interfaces' during the different versions and also had some custom interfaces
• Product running as virtual comport, like many products it uses a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines
• Read & erase error code, log data e. g. speed, gasoline, consume engine-rotating(RPM: Rotation Per Minutes)

Details:

• This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for Volkswagen, Skoda, Audi and Seat

• This VAG-COM 409.1 Cable can not work if your car uses a protocol/ bus system like VPW,PWM or Can-bus

• The VAG-COM 409.1 Cable may work with some versions of the car soft, but car soft used a lot of different interfaces' during the different versions and also had some custom interfaces

• Product running as virtual comport, like many products it uses a USB to Rs232 converter chip .But under special circumstances this can give some problems regarding time especially on the handshake lines

Package Included:

• 1 x Vagcom COM KKL VAG-COM 409.1 Cable
• 1 x CD