Tuner modules, Plug&Play
- 250 MHz PowerPC Processor (350 Mips)
- Linux
Operating System
- 1 x Smartcard-Reader
- MPEG2 Hardware
decoding
- Common available NIMs (DVB-S, DVB-C)
- Tuner modules,
Plug&Play
- V.24/RS232 Interface
- 10/100Mbit compatible
Ethernet Interface
- 2 LED status
- 32 MByte Flash, 96 MByte Ram
total
- integrated IDE Interface
- Support for
internal HDD 2,5" in any capacity
- unlimited channel lists
for TV/Radio
- channel-change time < 1 second
- full
automatic service scan
- supports directly bouquet-lists
-
supports EPG (electronic program guide)
- supports own videotext
- supports multiple LNB-Switching control (DiSEqC)
- fully
adaptable OSD in many languages and skin-support
- S/PDIF Interface
for digital bit stream out (AC-3)
- 1 x Scart-interfaces
-
S-Video connector
- analoge modem
DreamBox DM600 technical data
DBS-Tuner:
Frequency Range 950 . 2150 MHz
Signal Level - 65 dBm . - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
FEC Viterbi and
Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8
Roll-off Factor
35 %
Demultiplexing according ISO 13818-1
Video decoder:
Video Compression MPEG-2 and
MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 /
16:9
Letterbox for 4:3 TV-Device
Audio
decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48
kHz, 16 kHz, 22.05 kHz, 24 kHz
Output
analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1
kHz)
Crosstalk < -65 dB
Output
digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering
32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)
Video parameter:
Input Level FBAS 1 Vss +/- 0.3
dB on 75 Ohm
Teletext filter in conformity with ETS 300 472
Standard
TV-Scart:
Output: FBAS, RGB,
S-Video
Serielle Interface RS 232:
Typ
RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector
SUB-D-9
Function: Update of Firmware
Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware