Creative DIY mode design，with 5 High100%, Mid40%, Low10%, Strobe, SOS mode, can cancel or recover Mid, Low, Strobe, SOS mode at will.

Features:

50,000 hours lifespan Cree XP-G R4 LED
Max output 320 lumens
Max Duration: 5Lm/270 hours (Tested by XTAR 1x 2400mAh 18700 battery)

SMO reflector, throws beam over 145 meters
Powered by 1 x 17670/18650/18700 or 2 x CR123A/16340 (not included)

IPX-6 water-proof level
Tailcap switch control

Notice: The above-mentioned parameters tested in Lab are approximate and may vary between flashlight/charger, batteries and environments.

Specifications:

Specs.	Illumination levels
	Low	Mid	High	Strobe	SOS
Luminance	5lm	120lm	320lm	N/A	N/A
Duration	270h	13h30min	3h	N/A	N/A
Max range	145m
Max intensity	5230cd
Impact resistance	1m
Water resistance	IPX-6
Bulb	CREE XP-G R4 LED
Crust material	Anodized aircraft 6061 aluminum alloy
Working voltage	2.5V-8.4V
Battery	2x CR123A/2x ICR 123A/2x 16340, 1x 18650/1x 18700
Switch	Tail cap switch
Dimensions	36mm(head dia.) x 25mm(body dia.) x 140mm(length)
Net weight	122g(without battery)

Luminance mode canceling and recovering:

XTAR B01 is designed with 5 modes:
Off, Low, Mid, High, Strobe, and SOS


The flashlight can be DIYed or require Mid, Low, Strobe, SOS these 4 modes by cancelling or recovering the contactor.

1. When the light head is removed, you can see 4 pairs of contactors from left to right as the picture shows. The contactor we preset corresponded SOS, Strobe, Low, Mid these mode independently, weld or remove the contactor will cancel or recover the corresponding mode.

2. User can choose any modes at will before purchase, or turn to professional for assistance to DIY these modes. weld or remove the contactor will cancel or recover the corresponding mode.
1) Disconnect 4 pairs contactors.
2) Use electric soldering iron and solder to connect contactor, delete cancel mode.
3) Use electric soldering iron to melt the solder, recover the mode.

Package included:

1 x XTAR CREE R4 LED Flashlight Torch B01
1 x Lanyard      
1 x Holster      
1 x Spare O ring and inner switch