BRAND NEW OBDII / EOBDII AUTO SCANNER INTERFACE
1.Workswith all 1996 and newer cars & trucks that are OBD II compliant(including the VPW, PWM, ISO, KWP 2000 and CAN protocols)
2.Connect your car to your PC/Laptop or PDA via USB
3.Troubleshoot any problems in your vehicle by reading the Diagnostic Trouble Codes (DTC's)
4.Allow you to turn your computer into an Auto Diagnostic System.
5.Scan live data right from your car's computer.
6.Read and clear generic and manufacturer specific Diagnostic Trouble Codes (DTC) and turns off check engine (MIL) light
7.Display trouble codes and meanings
8.Support multiple trouble code requests: generic codes, pending codes and manufacturer's specific codes
9.Read Freeze Frame Data (with third party software)
10. Tests I/M Reading Status
11.Highly reliable and accurate
12. Safely communicates with the on-board computer
13. Exports data for spreadsheet formatting and printing
14. Monitor and record real time data and produce graphs
- Elm Chip installed
- Connects to your computers USB Port
- Operating voltage: 12V - includes internal protection for short circuits and over voltage
- No need for adapter or batteries ?takes its power directly from the vehicle's OBD2 plug
The item works on the following protocols:
- Multi-Protocol Support:
J1850 PWM (41.6 kbaud)
J1850 VPW (10.4 kbaud)
ISO 9141-2 (5 baud init, 10.4 kbaud)
ISO KWP (5 baud init, 10.4 kbaud)
ISO KWP (fast init, 10.4 kbaud)
ISO CAN (11 bit ID, 500 kbaud)
ISO CAN (29 bit ID, 500 kbaud)
ISO CAN (11 bit ID, 250 kbaud)
ISO CAN (29 bit ID, 250 kbaud)
The software (scan tool) included will run on DOS and Windows and includes the following features and functionalities:
- Displays current sensor data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure
Scan tool is free software. You can also download other software to run ELM327
Fora complete list of tested vehicles, click on the link below. **Note: Ifyour vehicle is not on this list it does not mean that the scanner willnot work for you. This is only a list of tested vehicles.
steps:
Install supplied or other software on computer
1.Turn the vehicle ignition off
2. Locate the 16-pin Data Link Connector and plug the cable into the connector
3. Turn the ignition on (needn't start the engine) and press enter
4. The scanner will now search for the specific protocol for your vehicle
5, Follow On-Screen Prompts and Menus!
Technical Specification:
- OBDII Plug: J1962 16-Pin Male (to Car)
- USB Port : (to Computer or PDA)
- Length OBD2 cable : 1.5 meters
- Weight (set) : About 380g
- Color : Black cable
Package included:
- Professional OBD II PC Interface Tool
- OBD II Connector Cable
- USB Cable
- ELM327 Software CD-ROM ( Scan tools)