For use in:

All hot and cold fluids and/or solids Aquariums Kitchens and bakeries Hydroponics and aquaculture Freezers/coolers and heating systems Motors, generators and ventilations systems Academic, scientific and medical laboratories

FEATURES

• Durable 2 ½” stainless steel probe with 20” cable
• Complete with wallet-style carrying case
• Large, easy-to-read LCD display

SPECIFICATIONS

Temp. Range: -58 to 482°F (-50 to 250°C)
Resolution: .0.1°C and 0.1 °F
Accuracy: ±1°C (-10 to 100°C ), ±2°C (101 to 200°C ), ±3°C (-50 to -10°C ), ±5°C (200 to 250°C )
Power source: 2 x 1.5V button cell batteries (included)
Dimensions: 5.4 x 10.8 x 1.2cm (2.1 x 4.2 x .5 inches)
Weight with case: 85g (3 oz)
Weight without case: 56.7g (2 oz) 

Limited Warranty

HM Digital, Inc. ("the Company") products are warranted to the purchaser against defective materials and workmanship.

Length of Warranty

The following products are covered under the Company's warranty for three (3) years: TDS-3, TDS-4, TDS-4TM, TM-1.

What is covered

Repair parts and labor, or replacement at the Company's option. Transportation charges for repaired or new product to be returned to the purchaser.

Accuracy

Products are guaranteed to perform within the specified accuracy only if and when the product is calibrated properly. NOTE: HM Digital does not guarantee the calibration of any product, including factory-calibrated products. For best performance, all scientific instruments must be calibrated properly and re-calibrated periodically.

What is not covered

Transportation charges for the defective product to be sent to the Company. Any consequential damages, incidental damages, or incidental expenses, including damages to property. This includes damages from abuse or improper maintenance such as tampering, unauthorized customization, wear and tear, water damage, or any other physical damage. The Company's products are not waterproof and should not be fully submerged in water. Products with any evidence of such damage will not be repaired or replaced. See additional note below. (NOTE - The COM-100, PH-200 and ORP-200 are watertight and completely submersible. Please ensure that the battery compartment and probe gasket ring are firmly tightened before submersing in water. The warranty does not cover water damage to the COM-100, PH-200 and ORP-200 due to parts not securely closed.)

All returned products MUST be included with a proof of purchase and a description of the problem for each product. If a proof of purchase and problem description are not included, HM Digital reserves the right to refuse warranty service.

Implied Warranties

Any implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to five years from date of purchase. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. To the extent any provision of this warranty is prohibited by federal and state law and cannot be preempted, it shall not be applicable. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

NOTE: Warranties are product-specific. Third-party products and products deemed by HM Digital as "accessories" are not covered under warranty. Third-party products include, but are not limited to, batteries and fittings. Accessories include, but are not limited to, precipitator rods, fuses, adhesives, Velcro and product cases.