NEW OEM 99 - 02 GM Vortec 4.8 5.3 6.0L Throttle Body Sierra Silverado GMC

Price: $69.95

Add to Cart

 
 
NEW "OEM" Vortec 4.8 5.3 6.0L Cable Throttle Body
 
99 - 02 GM Trucks, Silverado, Sierra, Denali, Escalade

ONLY $69.95

  Includes FREE Throttle Body Decals!

(Please Specify 5.3L, 6.0L, or Vortec)

*** Available with and without PCV Connections.  Please Specify after you Pay!  ***

Porting and Powdercoating Available on this Item!

Ported/Refinished Housing Add $50

Powdercoated Housing Add $50


At Jantzer Performance, we specialize in high quality Performance Throttle Bodies. 

  Since 2000, we have produced and sold thousands of throttle bodies for late model GM cars and trucks including Camaro's, Firebird's, Corvette's, and GTO's.  We are currently working on products for Jeep and Dodge Applications as well.

Our Throttle Bodies are the highest flowing, factory ported housings available on the market!

 Our throttle bodies are engineered to outflow the competition and have proven over time to be the most reliable unit available.  It's easy to port a LS1 Throttle Body, it's hard to port it for maximum performance. There's a very fine line between an exceptional LS1 Ported Throttle Body and one that's a paper weight.  This is why many competitors are very conservate on their porting.

Gains of 10-15 RWHP are typical!

 Throttle response is also improved drastically.  Most cars reduce their 1/4 mile ET by .1 - .2 and gain 1 - 2 mph.  Some customers are reporting 1-2 MPG gains in fuel economy.  This is one of the best low-cost mods you can make to your late model car/truck.  Results may vary.

--------------->     The Porting/Refinishing Service Includes:     <---------------

Housing Completely Cleaned & Media Blasted

Housing Ported & Shaped for Ultimate Flow 

Bump-Stop Mod To Fully Open Butterfly

Front Throttle Shaft Cut For Improved Flow

Polished Butterfly

New High-Strength Stainless Screws 

Precisely Assembled for Perfect Operation

--- NO CHARGE ---   NEW Throttle Body Decals  --- NO CHARGE ---

--- NO CHARGE ---  Remove Coolant Cross-over Lines (On Request)  --- NO CHARGE ---

NEW "OEM" TPS & IAC Sensors $80

Coolant Bypass Kit $5 Additional

----------  Why our product is better than the competition:  ----------

Our Porting is 2nd to None

Our Refinishing Service is more Thorough and Better Quality

We employ a special *surebright process to get the Newest possible Appearance

We Powdercoat where other's Paint !!!!!!!

We Sell you what you Need, Nothing More

We employ no Marketing gimmicks or tricks, our Products Perform!

Lifetime (Mechanical) Gurantee

We will be around to Service or Refinish your TB in the Future

Exterior Finish Options like Powdercoat & Show Polish

100% Satisfaction Gurantee - 14 Day Return Policy

----------  Finish Options  ----------

Powdercoated Housing  + $50.00  (Your Choice of Color)

Powdercoated Valve Covers & MAF Ends to match + $125.00

Estimated 2 - 5 Day Lead Time

Some Colors in Stock

Fully Polished Housing + $150.00

Click on the link below for a sample of our work!

http://community.webshots.com/user/jantzer98ss

---------- Directions For Purchase ---------- 

Go ahead and hit the buy it now and pay for the throttle body.  Contact us and let us know which decals you want and if you would like it ported, powder-coated, and/or a new set of sensors.  If you want it without PCV connections, let us know otherwise it will ship with them.  We will send over a money request through paypal for the remaining balance if applicable.

---------- We have made a Name Selling you what Works!   ---------- 

The LS1 Throttle body has a 75mm blade, but necks down to around 70mm in the stock configuration.  There is JUST enough meet to support being ported to 75mm throughout the throttle body housing.  They are sometimes referred to as 78mm, but they are in fact 75mm.  Other aftermarket throttle bodies like BBK and others sell 80 and 85mm units.  The truth is, it's ALL MARKETING!  They come with a restrictor plate that necks them back down to 75mm where they enter the intake.  The key is to buy the right throttle body for the job.  The intake manifold dictates what you need.  The stock GM 75mm intakes work best with the stock ported throttle bodies.  Why would you use an 80mm throttle body on a 75mm opening?  We sell up to 95mm Billet Throttle Bodies for seriously modified LSX motors, but the truth is the 75mm ported unit is the right TB for the stock GM intakes.  If/when you upgrade to the 92mm Fast or Professional Products intake, we have throttle bodies available for those applications.   Whether you buy one of our units or not, we hope you do your research and spend your money wisely.

 

WE APPRECIATE YOUR BUSINESS!

Return
Items must be returned within 7 days .
Refund will be given as Money back.
Refund policy details:
100% Satisfaction Gurantee. If you don't like it, you don't buy it!
Shipping

Destination: United States

CarrierMethodShipping CostPer additional Item
USPSPriority Mail Medium Flat Rate Box®$12.95$12.95
STANDARDStandard$0.00$0.00

Destination: Worldwide

CarrierMethodShipping CostPer additional Item
USPSPriority Mail Intl®$35.00$35.00
Payment Method

Type

Instructions to Buyer

Paypalnull
Insurance
Not Offered (Domestic)
 
Vendio Shopping Cart | Privacy Policy