P5153617: Stage 3R Turbo Upgrade Add-On Kit for Vehicle With Stage 2, (SRT4) 2003–04

This is the LAST REMAINING NEW KIT FROM MOPAR'S PARTS DEPO!
NEW IN THE BOX!
AND I PHYSICALLY HAVE IT IN STOCK!

Stage 3R Turbo Upgrade Kit Part# P5153617 — Iconel Steel Wheel:
This kit is for the owners that already have the stage 2 kit with or without turbo toys.

 Mopar Stage Kits are designed to be Plug-N-Play, No Tunning Necessary! Thats what makes these kits a step above the after market kits. Your car will remain easy to drive, just like it was stock, Until you put your foot into it unleashing all the extra power!

 Mopar knows that more is better, and the Turbo Upgrade Kits from Mopar Performance are just the thing to power the 2.4L Turbo to new heights. These kits kick it up with lots more than just tweaks to the turbocharger.

 For maximum power and torque, the Stage 3 Turbo Kit will be the ultimate upgrade for your SRT-4. The Stage 3 Turbo Upgrade Kit (with and without Turbo Toys) boosts power to an awesome 310 hp at 5600 rpm and 325 ft.-lbs. of torque at 3200-4800 rpm. The Stage 3 Kit with Turbo Toys in high-octane mode increases power to an amazing 355 hp at 5200 rpm and 365 ft.-lbs. of torque at 3200-4800 rpm! The Mopar Performance Cat-Back Exhaust System (P4510461) is required to obtain these power figures.

Increased WOT and part throttle boost Boost hold feature during WOT shifts More aggressive exhaust note during deceleration Optimized calibration for the Mopar Performance Blow-Off Valve Conversion Kit (P4510548—sold separately) Increased rev. limit from 6240 RPM to 6500 RPM!


REMEMBER: THIS IS IT! THE LAST REMAINING NEW KIT! YOU WILL NOT BE ABLE TO GET ANOTHER FROM MOPAR! THEY ARE NO LONGER BEING MADE!

Key Components:

• Stage 3 PCM with Block-Off Connector
• TD05HR-15GK2-10cm2 Turbo Unit and Manifold: 16% larger compressor wheel diameter to fl ow and compress more intake air, 19% larger turbine wheel diameter to fl ow more exhaust gas and reduce back pressure, 67% more turbine scroll area for reduced back pressure
• High-Flow (180 lph 75 psi) Fuel Pump Module
• Pressure Regulated Fuel Rail Assembly with 4.0 Bar Returnless Regulator and Hose Kit
• (4) 682 cc/min Fuel Injectors†
• 3.0 bar MAP Sensor†
• 3.0 bar TIP Sensor†

Calibration Features:

• Increased WOT and part throttle boost
• Boost hold feature during WOT shifts
• More aggressive exhaust note during deceleration
• Optimized calibration for the Mopar Blow-Off Valve Conversion Kit (P4510548 — sold separately)
• Increased rev. limit from 6,240 rpm to 6,500 rpm

Please Note:

In order for the Engine Controller to work with YOUR vehicle, It MUST be REFLASHED with YOUR VIN "Vehicle Identification Number". You can have this done by following the instructions below:

Quote:

"Hello, My name is Stephanie and I am from Flight Systems, the company that supplies you with your turbo kits. If you have bought a used stage kit and need your vin number reflashed into it you can send your pcm to me and I can reflash it for you. I can NOT reflash stock pcm's. As you should know, if you do not reflash the module and try to install the pcm in your vehicle without changing the vin, your vehicle will not start. The charge for this will be $30 plus s&h plus the COD charge. I can either ship it back to you overnight air, which is expensive or ground which will only cost $4-5 more on top of the $30 plus the $7 charge for COD. The cost for everything will be around $43, which will come COD (collect on delivery). Everything will be sent back using the carrier UPS, no exceptions. When the driver drops your pcm off you must give him a check or m o made out to Flight Systems, for the exact amount. Once I ship your pcm out, I can send you a pm with your tracking number and total COD amount. The new address is: Flight Systems 33820 Riviera Dr. Fraser, MI 48026 Attn: Stephanie/Reprogram Please make sure to put inside the box your vin number, return address, a telephone number I can reach you at in case of any problems,your name on the forums, and how you would like it sent back to you; ground or overnight. Your mileage is not needed because that is not programmed into the modules. Please make sure the pcm is packaged properly, any damage that happens on delivery to me is not my responsibility. Let me know when you are sending it out to me by pm so I know when it should arrive. I will ship it back out to you 1-2 days after I receive the kit. If you have any questions, you can pm me as well. Have a great day!! Stephanie Flight Systems Parts Department" Kit will be shipped by UPS ONLY! Please be aware that shipping insurance charges must be paid for BEFORE I will ship you the kit.

Part#: P5153617
Shipping Weight: 55lbs
ONLY 1 Units in Stock
Manufactured by: Mopar Performance

RETURN POLICY:

Mopar Performance parts are sold "as is" without any
warranty whatsoever.
The entire risk as to quality and performance of such parts is with the
buyer. Should such parts prove defective following their
purchase, the buyer and not the manufacturer, distributor or
retailer, assumes the entire cost of all necessary servicing or
repair. Chrysler, Dodge, and Jeep® vehicle and parts
warranties are voided if the vehicle or parts are used for
competition or if they fail as a result of modification.