You
are buying one new Morse Drum Pump unit. Some facts
are shown below and the photo shows a general picture of the item for
sale. Item Ships from Manufacturer, please contact us for current lead times. Manufacturer description below. *Please visit www.morsemfgco.com
for product specific Information. For help using the variation tab, please click 'Variety Selector Instructions' below.
Double-action piston manual drum / barrel pumps are self priming, delivering on both
the forward and the back stroke. It takes less than 5 cycles to yield a
gallon (3.8 liters).
Each Morse 55-gallon drum (208 liter barrel) hand pump is made in the same style and has
the same action. They vary only in their materials of construction,
consisting of specific polymers and elastomers for resistance to certain
types of chemicals (please refer to the
drum pump chart below).
Morse hand drum pumps - barrel pumps
Morse manual drum and barrel pumps provide a controlled
discharge rate of approximately 1 quart (.95 liter) on complete forward and backward
cycle at 10 psi over 24 feet (7.3 m). They fit the NPT (National Pipe Thread) of
the 2" (5 cm) bung on 55 or 30 gallon (208 or 114 liter) steel drum.
Adaptors are also available to use Morse
55-gallon (208 liter) barrel pumps with the buttress thread of the 2"
(5 cm) bung on your
plastic barrels.
- Suction lift tested for 15 feet (4.6 m) minimum
- Discharge head up to 25 feet (7.3 m)
- Output head pressure is up to 10.83 psi
- 1" (2.54 cm) NPT suction tube
- 3/4" (1.9 cm) NPT discharge tube
- Two position drum pump handle
- Self-lubricating teflon piston ring operates wet or dry for long
life
- Chemically compatible with liquids up to 120 F (49 C)
- Handle viscosity up to 2,000 SSU (about as thick as 30 weight
motor oil at room temperature). Handle effort increases as viscosity
approaches this maximum.
- Models 26, 271-AE and 27-4AV drum / barrel pumps are generally useful with
compatible liquids in a mild acidity/alkalinity range of pH 4 to 9.
Avoid stronger acids and caustics.
- Models 28-5BV and 28-6BE drum / barrel pumps are useful in a wider pH range.
- Many other chemical characteristics effect choice of barrel pump
(see
drum pump chart below or
chemical
compatibility for specific fluids)
~ ~ CAUTION ~ ~
- Chemical compatibility of a drum or barrel pump should be
checked for
EACH LIQUID BY
CHEMICAL NAME
- No single drum pump can be universally chemical resistant
- Barrel pumps available include flammable drum pump and oil
drum pump
- Some blends of chemicals may not be suitable for any of these
drum pumps
- Different barrel pump models may be necessary for various
liquids
- Final determination of suitability for use intended, or manner
of use, is responsibility of the user. Consult Morse for advice on
the correct barrel pump for specific liquids. Please furnish
chemical names.
- Chemicals may be hazardous. It is the user's responsibility to
take appropriate safety and protective measures.
| Drum and Barrel Pumps |
|
| 26 |
polyester |
viton |
cork-nitrile |
PVC |
polyester |
petroleum products,
lube oils* |
10 Lb.
(4.5 kg) |
L21" W9" H9"
(53 x 23 x 23 cm) |
| 27-1AE |
polyester |
EPDM |
EPDM |
EPDM |
polyester |
methyl alcohol,
ethyl alcohol* |
10 Lb.
(4.5 kg) |
L21" W9" H9"
(53 x 23 x 23 cm) |
| 27-4AV |
polyester |
viton |
viton |
cross linked polyeth. |
polyester |
some napthas*,
some aromatics* |
12 Lb.
(5.5 kg) |
L19" W19" H9"
(48 x 48 x 23 cm) |
| 28-5BV |
ryton |
viton |
viton |
cross linked polyeth. |
teflon |
some chlorinated solvents, acids,
aromatics, xylene* |
12 Lb.
(5.5 kg) |
L19" W19" H9"
(48 x 48 x 23 cm) |
| 28-6BE |
ryton |
EPDM |
EPDM |
EPDM |
teflon |
some acids, caustics,
ketones, acetates* |
11 Lb.
(5 kg) |
L21" W9" H9"
(53 x 23 x 23 cm) |
