AKG 414 XLS STEREO PAIR MICROPHONES
Authorized Dealer! Satisfaction Guaranteed!

Item Condition:
BRAND NEW

Full Manufacturer Warranty

FREE Shipping!

Professional studio recording Professional stage miking Ensemble recording Drum overhead miking Classic music recording Choir miking	C 414 XLS/ST

Absolutely perfectly matched stereo pair thanks to AKG's sophisticated computer-aided matching method Highest possible correlation over the whole frequency range and virtually identical sensitivity Selected from thousands of individual microphones Designed, Engineered and Built in Vienna, Austria Realistic stereo recordings require microphones with outstanding performance and excellent quality. They also require performance consistency and accurate localisation from the pair of microphones. Therefore, every factory-matched pair has been created from thousands of individual microphones selected by AKG's sophisticated computer-aided matching method. The result is the highest possible correlation over the whole frequency range and virtually identical sensitivity for stunning, three-dimensional recordings. The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 300 Hz to 8,000 Hz of the individual frequency response when used in cardioid mode. The microphones are selected from a large quantity of individual microphones according to the described criteria by using a proprietary computer program. Using this matched pair for stereo recordings in various techniques will provide a good and stable balance without frequency-dependent shifting of the stereo panorama. The kit includes all the standard accessories of the deluxe package (excluding the PF 80) along with a stereo bar and proof of performance charts in an attractive carrying case (large Soundtool case).

Specs:

Polar pattern	omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight and 4 intermediate settings
Frequency range	20 to 20, 000 Hz
Sensitivity	20 mV/Pa (-34 dBV) ± 0.5 dB
Max. SPL	200/400/800/1600 Pa = 140/146/152/158 dB (0/-6/-12/-18 dB) for 0.5% THD
Equivalent noise level	6 dB-A (0 dB preattenuation) (IEC 60268-4)
Signal/noise ratio	88 dB
Preattenuation pad	0 dB, -6 dB, -12 dB, -18 dB, switchable
Bass cut filter slope	12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Impedance	<=200 ohms
Recommended load impedance	>= 2,200 ohms
Supply voltage	48 V phantom power to DIN/IEC
Powering	approximately 4 mA
Connector	3-pin XLR to IEC
Dimensions	50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
Net weight	300 g (10.6 oz.)
Patent(s)	Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)