Brand New Shure SM57 Dynamic Mic
Authorized Dealer Full Warranty


Beware of lower priced knockoffs on eBay made in China you will not be getting the real thing and will not be covered under warranty! Most of them are knockoffs! WE ARE AUTHORIZED, you will get FULL WARRANTY!!!!

The Shure SM57 is one of the most popular professional instrument microphones of all time. The dynamic SM57 mic performs reliably delivering natural sound night after night. Its durable, bulletproof design stands up to road travel and abuse. Perfectly at home in the studio too. The Shure SM57 boasts wide frequency response (40Hz-15kHz) and a tight cardioid polar pattern that are ideal for close-in speaker miking.

Shure SM57 Instrument/Vocal Mic Features:

• Natural sounding
  Durable bulletproof design
  Used widely in studios as well as on stage
  Frequency response: 40Hz-15kHz
  Tight cardioid polar pattern

Shure SM57 Instrument/Vocal Mic Specifications:

• Frequency response: 40Hz to 15,000Hz
  Polar pattern: Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency
  Sensitivity (at 1,000Hz): Open circuit voltage: -56.0 dBV/Pa (1.6 mV) (Note: 1 Pa = 94dB SPL)
  Impedance: Rated impedance is 150ohms (310ohms actual) for connection to microphone inputs rated low impedance
  Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  Connector: 3-pin professional audio connector (male XLR type)
  Dimensions: 1-1/4"W (top) x 6-3/18"L x 29/32" (bottom)
  Net weight (without cable): 284g (10 oz.)

• Type: Dynamic (moving coil)
  Frequency Response: 50 to 15kHz
  Polar Pattern: Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency
  Sensitivity (at 1,000 Hz Open Circuit Voltage): -54.5 dBV/Pa (1.85 mV), 1 Pa = 94dB SPL
  Impedance: Rated impedance is 150 ohms (300 ohms actual) for connection to microphone inputs rated low impedance
  Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  Connector: 3-pin professional audio connector (male XLR type)
  Case: Dark gray, enamel-painted, die-cast metal; matte-finished, silver, spherical steel mesh grille
  Overall dimensions: 6-3/8"L, 2"W
  Net weight: 298g (10.5oz.)