Insulated for protection against electric shock up to 1000V • Chrome Moly steel blade with cushion grip handle • Individually tested to exceed standards • Comply with VDE & IEC 60900-2004 ratings & are clearly marked with the official 1000V rating symbol • ATD-62591 - 3/32” X 3” (2.5 X 80mm) Slotted • ATD-62592 - 5/32” X 4” (4.0 X 100mm) Slotted • ATD-62593 - 7/32” X 5” (5.5 X 125mm) Slotted • ATD-62594 - 1/4” X 6” (6.5 X 150mm) Slotted • ATD-62595- #0 X 3” (80mm) Phillips • ATD-62596 - #1 X 4” (100mm) Phillips • ATD-62597 - #2 X 4” (100mm) Phillips * Warning: Whenever possible, always de-energize lines & equipment prior to working on or around them. Insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source. ** Warning: DO NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source. *** Warning: Always wear approved eye protection. Always inspect your tools before use. DO NOT use tool if orange coating cracks, breaks or becomes damaged. **** Warning: Because moisture, films or other surface contaminates are conductive, insulated tools must be kept clean, dry & free of any surface contaminates.