We Provide a full-range of professional production equipment and services with emphasis on digital media science in Post Production. International DSM Group can help you build and customize your media technology business network, from individual workstations accessorizing complete broadcast HD and film facility level.
Description
Atlas Sound FAP82T Strategy II 8 Inch 60W @ 70.7V/100V Coaxial Tuned & Ported Ceiling System FAP82T
Specifications
The Atlas Sound FAP82T is a premium performance 70.7/100V tuned & ported 8" coaxial ceiling speaker system perfectly suited for many business music and public address applications -especially applications where high ceilings require loudspeakers with increased efficiency and tighter pattern control.
The FAP82T's 100 degree dispersion angle (in the 2kHz octave band) is perfect for higher ceiling applications where tighter pattern control is required. Tight pattern control (not exceeding 100 degrees) is important for high ceiling applications. Loudspeakers exhibiting wider dispersion than 100 degrees will exceed 6dB of drop off at the edge of the coverage pattern causing excessive SPL variances. Using more of the same wide coverage speaker in a high ceiling application to compensate only worsens the situation as comb filtering from multi-path arrivals will result.
High quality construction 1" voice coil, 8" coaxial cone type driver includes polypropylene cone with a butyl rubber surround. The 19mm coaxially mounted tweeter is constructed of PEI. sensitivity of 90dB average means less power may be required to achieve the desired SPL. This loudspeaker is factory assembled to an optimally tuned & ported deep drawn enclosure and includes a specially designed 60 watt low saturation 70.7V/100V transformer. A convenient front mounted selector switch allows tap selection without the need to remove the speaker from the ceiling. This tap selector switch also includes a transformer bypass setting for instances where the 8 ohm FAP82T driver is to be direct coupled with a low impedance amplifier.
Tech Data
"Press -fit" grille to better blend into contemporary architecture
4 Pole detachable "phoenix" style connector allows easy pre-wiring and is convenient for daisy chaining additional speakers
60 watt enhanced quality 70.7V/100V internal transformer minimizes insertion loss and maintains low frequency response
Extended low frequency response from the optimally tuned and ported deep drawn galvanized steel enclosure (937 cubic inches)
Front mounted tap selector switch for easy system tuning adjustments (1.9W to 60W @ 70.7V plus 8 ohm setting)
Includes C-ring/V-rail tile bridge mounting hardware
May be pendulum mounted via top mounted eyebolt (included). Enclosure is also finished in white for optimum aesthetics when hung in open ceiling applications
Unique "trap door" input section allows for through conduit runs with rigid or flex conduit
Specifications
Depth 12 3/4" (32.385 cm)
Diameter 15 3/4" (40.005 cm)
Frequency Response 55Hz -20kHz
Power Taps 1.9, 3.8, 7.5, 15, 30 & 60W
Speaker Type Coaxial
Dispersion 100°
Sensitivity 90dB Average
UL Listed/Standard 1480
Item Condition
NEVER USED BRAND NEW SYSTEM Full Hardware Warranty
Shipping Agreement
Buyer will pay actual shipping costs, including extra for packagingonly if needed. Shipping costs based on weight TBD after auction. Item(s) will be shipped via UPS, FedEx. ( Insured )
Payment Information
Paypal, wire transfer or a cashier check accepted, guarantees immediate shipping upon receipt and verification.
Payment must be received within 3 days of the closing auction,
Terms & Conditions
Please e-mail or call for any questions prior to bidding. 1-714-749-1371 We reserves the right to refuse a winningbid from a buyer with numerous negative feedback. International DSM Group reserves the right to cancel the auction if bid retractions occur during last 24 hours of auction. AVT01