Mad Professor Blueberry Bass Overdrive Guitar Effects Pedal BBO PCB Version
This is the PCB version of the pedal.
THE BBBO WAS DESIGNED FOR ELECTRIC BASS TO GET LIGHT TO MEDIUM OVERDRIVE REMINISCENT OF VINTAGE TUBE BASS AMPLIFIERS.
While mainly designed for bass guitar, the BBBO can also be used with other instruments for low, dynamically controlled distortion.
Controls
VOLUME: controls output
DRIVE: sets the amount of distortion and sustain, as well as the type of distortion. Lower settings give dynamically controlled overdrive, the unit distorts more the harder you strike the strings and there is no definite clipping point, but rather different shades of distortion as the amplitude changes.
Higher settings will give more compressed sounds.
A good starting point with most basses is fully CCW, turn the knob until you find the overdrive level that suits your playing. Lower settings are good for old school tube amplifier tone, while higher settings gives denser distortion.
NATURE: is a tonecontrol for filtering and to control what register distorts. Turning CCW gives more lowend and also distortion in the lower registers. Turning CW gives an emphasis in the upper midrange for more protruding solo bass tone.
Electrical specification:
• Input impedance approximately 500K Ohms
• Recommended load 50K Ohms
• Current consumption at 9V approximately 4 mA
• Max gain at 1KHz approximately 50 dB
• Supply voltage range 8-12V’s
• True bypass
POWER REQUIREMENTS: (not included)
6F22 9V battery or DC eliminator
2.1 mm plug
As a bonus for our customers, your pedal will ship with 2 quality 6" patch cables with soldered metal connectors.
Texas Guitar Ranch is an authorized Mad Professor dealer. Your pedal comes with full manufacturer warranty.
Condition: New$169.00
THE BBBO WAS DESIGNED FOR ELECTRIC BASS TO GET LIGHT TO MEDIUM OVERDRIVE REMINISCENT OF VINTAGE TUBE BASS AMPLIFIERS.
While mainly designed for bass guitar, the BBBO can also be used with other instruments for low, dynamically controlled distortion.
Controls
VOLUME: controls output
DRIVE: sets the amount of distortion and sustain, as well as the type of distortion. Lower settings give dynamically controlled overdrive, the unit distorts more the harder you strike the strings and there is no definite clipping point, but rather different shades of distortion as the amplitude changes.
Higher settings will give more compressed sounds.
A good starting point with most basses is fully CCW, turn the knob until you find the overdrive level that suits your playing. Lower settings are good for old school tube amplifier tone, while higher settings gives denser distortion.
NATURE: is a tonecontrol for filtering and to control what register distorts. Turning CCW gives more lowend and also distortion in the lower registers. Turning CW gives an emphasis in the upper midrange for more protruding solo bass tone.
Electrical specification:
• Input impedance approximately 500K Ohms
• Recommended load 50K Ohms
• Current consumption at 9V approximately 4 mA
• Max gain at 1KHz approximately 50 dB
• Supply voltage range 8-12V’s
• True bypass
POWER REQUIREMENTS: (not included)
6F22 9V battery or DC eliminator
2.1 mm plug
As a bonus for our customers, your pedal will ship with 2 quality 6" patch cables with soldered metal connectors.
Texas Guitar Ranch is an authorized Mad Professor dealer. Your pedal comes with full manufacturer warranty.
Condition: New
Shipping Carriers
Payment Method
Handling
$0.00(Domestic)
$0.00(International)
Destination: United States | |||
|---|---|---|---|
| Carrier | Method | Shipping Cost | Per additional Item |
| USPS | Priority Mail® | $0.00 | |
| NONE | Local Pickup | $0.00 | |
Payment Method
Type | Instructions to Buyer |
|---|---|
| Paypal |
Handling
$0.00(Domestic)
$0.00(International)