MAKITA DPC 7321 HD 14 Inch Power Concrete / Metal Cutoff Saw

                                                           COMES WITH ITS OWN MAKITA TOOL KIT, AND SIX NEW 14in. NORTON METAL CUTING BLADES.       

                                                                                      This saw has been tested,  works great and shows normal signs of use.

Features:

Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle
Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
Improved ignition system with larger flywheel and rare earth magnets for more power
Starter grip and decompression valve located on the same side for faster starting
Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges,
(Features from manufacturer website)


Specifications:

Displacement cu in (cm3): 4.5 (73)
Bore in (mm): 1.97 (50)
Stroke in (mm): 1.46 (37)
Max. power hp (kW): 5.6 (4.2)
Max. torque Nm: 5.0
Idling speed 1/min: 2,500
Clutch engagement speed 1/min: 3,800
Engine speed limitation 1/min: 9,350 ± 145
Max. spindle speed 1/min: 4,300
Sound pressure level at the operators ear dB (A): 104
Sound pressure level at the bystander's position (50 ft) dB (A): 86
Vibration acceleration ah,w per EN 1454
- Tubular handle (idle/rated spindle speed) m/s2: 7 / 6
- Rear handle (idle/rated spindle speed) m/s2: 8 / 7
Carburetor (diaphragm carburetor) Type: WALBRO WJ-105
Ignition system (with speed limitation) Type: electronic
Spark plug Type: NGK BPMR 7A / BOSCH WSR 6F / CHAMPION RCJ 6Y
Electrode gap in (mm): .020 (0.5)
Fuel consumption at max. load per ISO 8893 kg/h: 2.1
Specific consumption at max. load per ISO 8893 g/kWh: 500
Fuel tank capacity fl oz (l): 37 (1.1)
Mixture ratio (fuel/two-stroke oil)
- when using MAKITA HP 100 high-performance oil: 100:1
- when using MAKITA oil: 50:1
Cutting disc for 80 m/sec. 2) in: 14" / 0.8" / 0.2" 3)
Cutting disc for 80 m/sec. 2) 4) in: 14" / 1" / 0.2" 3)
Arbor diameter in: 0.8" / 1.0"
V-belt no.: 965 300 470
Overall weight (tanks empty, without cutting disc) lb: 22.04
Notes: 2) Circumference speed at max. engine speed
3) Outside diameter / arbor hole / thickness
4) Country-specific


Makita DPC7321 Power Cutter
SKU P23-119844-1

shiping to lower 48 states only.